0

5 Tips for Air Conditioner Repair

With such hot weather, air conditioner is becoming a necessity in every household.

A well-maintained air conditioner not only saves energy but also costs less to run.

Of course, the maintenance of air conditioners is too costly.

So, before calling for professional help, why not troubleshoot on your own first?

In this article, I will tell you 5 tips for air conditioner repair. This will help you save money on the professional repair.

So, let’s check the tips.

1.   Examine the thermostat

Whenever you feel that your air conditioner is not cooling the room properly, the first thing you need to do is to check the thermostat. Thermostat basically controls the temperature of the air conditioner. Make sure the temperature is set lower than the room temperature. Also, it is important that your thermostat is not exposed to the sunlight directly; else it will show the wrong temperature reading.

You can replace your mechanical thermostat with a smart and programmable thermostat. With smart thermostat, you can set your desired temperature. When you are in the room, you can set it at lower temperature and when you are not in the room, it will be a little warmer but just enough to maintain the temperature.

2.   Clean your filter

Second most common reason for air conditioner not cooling properly is because of dirty or clogged filters. It is important to clean or change your air conditioner filter regularly. Dirty filter will affect the performance of the air conditioner by preventing the air pass through it.

If your air conditioner usage is high or you have pets, then it is important that you clean or replace your filter regularly. Also, you can install a high-quality filter so that pollens, dust particles, and allergens are filtered and you get clean air through the air conditioner.

3.   Clean the outside unit

Sometimes, the outer units of air conditioners are placed where there are plants, grass or dirt. Therefore, the chances are higher that some leaves or dirt is accumulated in the outer unit which affects the air flow. So, to clean it first shut off power and then you can take a water hose to clean it thoroughly. Gently remove the debris without bending or damaging the compressor fins on the coils.

4.   Clear your ducts

It is also important to clear out any blockage in your ducts to make sure that air flow is not blocked. If you have doubt that mold is build up in the duct or dirt has been accumulated then clean the duct properly. This will improve the air conditioner performance significantly.

5.   Check condenser unit’s fan

The condenser unit’s fan blades need to be free of cracks and in good shape to make sure that air conditioner runs efficiently. So, do check the condition of the fan blades and replace them if needed. Also, keep oiling the fan motor bearings regularly so that they perform well.

If you still think that your air conditioner is not giving its full performance, you can call for professional help. Home on Call provides affordable Air Conditioner repair and maintenance service.  They provide AC repair services for both residential and commercial air conditioners. They also have affordable HVAC (Heating, Ventilation and Air conditioning) maintenance contractors that can repair your AC within 24 hours.

So, go try some troubleshooting on your own with the above tips and if needed, call a professional help.

Zipmeme

Leave a Reply

Your email address will not be published. Required fields are marked *